Basic
Changing Audio Level DisplaySetting the AUX Mode
Pattern
You can input TV/video sound by connecting an
1Press the DISP button to switch the displayoptional "M-Bus V-Link" (M-Bus/RCA interface
pattern.cable KCM-122B) to this component.
? DISP1 ? DISP2 ? DISP OFF
1Press and hold the SETUP button for at least 3
DISP1:seconds.
Lights the Volume indicator and Audio Level
indicator.
2Press the g DN or f UP button to select
Volume indicatorthe AUX mode.
? FM LV ?? REG ?? SUB ?
? AUX ?? 100kHz/50kHz ?
Audio Level indicator
FR
3Press the BAND button to toggle the mode
DISP2:between AUX ON and AUX OFF.
Lights the mode and value bars to show the
settings in the Bass engine display.4Press the SETUP button to return to normal
mode.
Example settings:
Bass centre frequency:
100 Hz5To adjust the volume, etc., first press the
Bass band width: WIDE1SOURCE button and select the AUX mode, then
Bass level: - 6make the necessary adjustment.ES
? TUNER ? CD/TAPE ? AUX
NOTE
The last mode set will remain in effect. The mode and
value bars light and show the Bass engine settings.NOTE
When AUX ON is selected, a CD Changer cannot be
DISP OFF:used.
Turns off the light in Bass engine display.
If you set DISP OFF, the Volume indicator, Audio
DELevel indicator, and Bass engine displays are not
lit at all times.
IT
SE
9-EN |