Display Angle AdjustmentSelecting BBE Mode
Movable displayThe BBE (Barcus Berry Electronics) processor
installed in this unit is designed to correct the
phase distortion inherent in most loudspeaker
designs. Ensuring the phase integrity of the signal
driving the speakers improves the accurate
reproduction of the sound.
The movable display may be adjusted to 3
different angles depending upon user preference.
1Press and hold the BBE button for at least 2
seconds to turn on the BBE mode.
1Press the ANGLE 89 button to adjust the angleEach press toggles between the BBE on and off
of the movable display.modes.
NOTES
" The display will close a half minute after the ignition2In BBE mode, press the BBE knob to select the
key is turned to the OFF position.BBE adjusting mode.
" The adjusted angle of the display is stored in memory.Each press changes the adjusting mode.
There is no need to re-adjust the angle when the power
is turned back on.
3To change to a desired BBE level, rotate the
CAUTIONMODE (Audio Control) knob.
Keep hands (or any other object) away from the display
The BBE level can be changed from +1 to +3.
while it is opening or closing to avoid damage or injury.
The back of the movable display will get very warm
under normal operating conditions. This is not aAudio Mute Function
malfunction. Do not touch.
Activating this function will instantly lower the
Adjusting Volume/Balance
volume level by 20 dB.
(Between Left and Right)/Fader
(Between Front and Rear)1Press the MUTE button to activate the MUTE
mode. The audio level will decrease by about
20 dB.
1Press the MODE button repeatedly to choose the
Pressing the MUTE button again will bring the
desired mode.
audio back to its previous level.
Each press changes the modes as follows:
? BALANCE ? FADER ? VOLUME
Displaying Time
NOTES1Press the CLK (clock) button repeatedly until the
" If the MODE button is not pressed within 5 secondstime is displayed.
after selecting the BALANCE or FADER mode, the
Each press changes the modes as follows:
unit automatically returns to the VOLUME mode.
" When the subwoofer mode is ON, its level may also beRadio mode
adjusted.Clock priority
?Radio frequency ??TITLE mode
" When the BBE mode is ON, its level may also bemode
adjusted.
CD Player/Changer modes
2Rotate the Audio Control knob until the desired
Playing timeClock priorityDISC TEXT
sound is obtained in each mode.???
modemodemode
NOTE
TRACK
Depending on the connected devices, some functions and?TITLE mode?
TEXT mode
display indications do not work.
NOTE
Selecting any tuner or CD function while in the clock
priority mode will interrupt the time display
momentarily. The function selected will be displayed for
about 5 seconds before the time returns to the display.
5-EN |