Radio
Automatic Seek TuningManual Storing of Station Presets
1Press the SOURCE button until a radio1Select the radio band and tune in a desired radio
frequency appears in the display.station you wish to store in the preset memory.
2Press the BAND button repeatedly until the2Press and hold any one of the Preset buttons (1
desired radio band is displayed.through 6) for at least 2 seconds until the station
Each press changes the band:frequency on the display blinks.
? FM1 ? FM2 ? FM3 ? MW ? LW
3Press the Preset button into which you wish to
store the station while the frequency display is
blinking (within 5 seconds).
3Press the TUNE button to illuminate the DX and
The display stops blinking once the station has
SEEK indicators in the display.
been memorized. The display shows the band,
With the DX (Distance) mode activated, both
preset No. with a tr9iangle () and station
strong and weak stations will be tuned in the
frequency memorized.
Auto-Seek operation.
Press again to return to the local mode. The DX
4Repeat the procedure to store up to 5 other
indicator will turn off and the SEEK indicator will
stations onto the same band.
remain illuminated. Now, only strong stations will
To use this procedure for other bands, simply
be tuned.
select the band desired and repeat the
procedure.
4Press the g DN or f UP button to
A total of 30 stations can be stored in the preset
automatically seek for a station downward or
upward respectively.memory (6 stations for each band; FM1, FM2,
The unit will stop at the next station it findsFM3, MW and L.W).
Press the same button again to seek the nextNOTE
station.If you store a station in a preset memory which already
has a station, the current station will be cleared and
replaced with the new station.
15-EN |
ACEC
